When was the last time you checked your water heater? If you are like most people, the answer is never. This is one of the most expensive home repairs that we have to make, so if you don’t check it now, you may end up spending thousands of dollars fixing it down the road. Here are some great reasons why your water bill is so high and how to cut it down.
There are two major causes for water bills to be so high. The first is from major leaks, which means there is a major leak in your water heater or plumbing system. This is usually a slow leak, meaning it takes a long time for the leak to build up and cause a big problem. If you didn’t know you had a leak, it could cost you a ton of money since any leak from a water heater can contribute to higher water usage and therefore a higher water bill. It is a good idea to regularly check your plumbing system to detect any leaks. If you are looking for someone to look at your hot water in Geelong, go online and do your research, there are a lot of reputable companies to help.
The second biggest reason your water bill is high is from not using low-flow toilets. Low-flow toilets use less water than standard ones but they still waste a lot of gallons per flush. These types of toilets can save a lot of water over time and with every flush.
To solve water problems, you need to do more at the source of your water than just change your toilet. There are actually a few things that you can do at home to lower your water bills and make your water heater more efficient. Here are a few:
Use a low-flow toilet. These toilets use less water than normal ones but they don’t waste as much. For each flush, you only use about half as much water as you would with a standard toilet. If you only use half of the water you’re using per flush, you’ll use a lot less water overall. You can still have high water bills if your toilet wastes a lot of gallons per minute. This is because it takes more water to go through each flush with a low-flow toilet than it does with a high-flow model.
Regularly check for leaks that you can’t see. This goes for anything that uses running water, whether it is a sink, toilet, or washer dryer. Have a regular maintenance routine. Most homeowners don’t keep an eye on their faucets. They think that they’ll take care of the problem when it starts. However, it’s usually better to check your water bill every month than to wait until it’s too late. Most homes use between five and ten gallons of water per flush. The average water bill in the US is about 17 gallons per flush.
Consider installing a new low-flow toilet or upgrading to an electric bill efficient model. These two upgrades will help you save money and reduce your energy consumption which will help you reduce your utility bills. Also, if you make some changes, such as replacing your old water heater with a tankless model, you’ll also be improving your air quality and reducing your exposure to indoor pollution, which can lead to health problems and lower income.
Invest in new, more energy efficient appliances. These two improvements alone could save you more than a few hundred dollars per year, depending on which model you choose. In addition, energy Star ratings are important in helping you save money on your utilities because they indicate to the utility companies that your appliance will consume less energy over its lifetime. So over the long-term, these little upgrades could pay for themselves.
Switch to energy-efficient appliances, which often cost less than a tank of gas to run. This one alone could save you thousands of dollars over the long-term. Also, appliances that have timers
that turn off and on based on the temperature of the room will save you money, too. These thermostats are called programmable thermostats. Finally, using a high-efficiency boiler in your home can save you even more over the long-term. The higher the efficiency of your hot water heater and boiler, the less you have to use electricity to heat it.
Get a new faucet or replace your old one with a low-flow toilet. Many homes have high-flow toilets that have a tendency to run continuously, wasting gallons upon gallons of water. A low flow toilet only uses a fraction of the water, which can save you hundreds of gallons over the long run. If you notice any leaks, call your local plumber for advice on leaks around the plumbing.
There are many ways to save water and save eco-friendly water for your home.
Add Comment